What’s In the BOX?

• TEO device
• USB charging cable
• Instruction manual

Specifications

• Pre heating time: 20 seconds
• Charging time: 120 mins
• Battery capacity: 1700mAh
• Battery life: 20 sticks

NEAFS TEO Heating Device – Design and Build Quality

The device has a height of 116mm, a width of 28mm and a mere 16mm thick so that makes it quite pocket friendly. It also weighs very little and combined with the ergonomic design is very comfortable in the hand.

There’s a nice reflective trim running down one edge helping to give it a slick, polished appearance. It’s also where the heating button can be found. It’s slightly raised and in a comfortable position for the thumb.

The heating sticks are pushed down into the circular barrel on the top cap.

The top cap needs to be removed to reveal USB-C Charging Port.

This also exposes the heating blade of the TEO. It’s easy enough to maintain and NEAFS suggest using a 75% alcohol solution when cleaning.

Heating Sticks

They measure 45 x 6mm and to all intents and purposes resemble mini cigarettes. Compatible with standard Iqos heating sticks (Heets).

Quick Start Guide

How To Use the NEAFS TEO Heating Device

• Turn the device on or off by pressing the heating button five times
• Gently insert a NEAF stick into the round barrel at the top until it can’t go any further

• Activate the TEO by holding the heating button for 2 seconds
• After 20 seconds a vibration will indicate the TEO is ready for use

The NEAFS TEO heating device will automatically stop heating after 5 minutes. It can be manually stopped by holding the heating button for 3 seconds until the device vibrates.